(2) 25mm (1″) 5×4.5 to 5×4.5 Wheel Spacers for Ford Mustang Edge Ranger Explorer

November 24, 2016 - Comment

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES 1967-2014 Ford Mustang 2007-2014 Ford Edge 2003-2004 Ford Mach 1 1991-2011 Ford Crown Victoria 1982-1990 Ford Bronco (Does not fit XLT Model) 1981-2011 Ford Ranger 1991-2015 Ford Explorer ADDITIONAL INFORMATION Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs

Buy Now! $34.95Amazon.com Price
(as of April 22, 2019 2:18 pm GMT+0000 - Details)

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

1967-2014 Ford Mustang
2007-2014 Ford Edge
2003-2004 Ford Mach 1
1991-2011 Ford Crown Victoria
1982-1990 Ford Bronco (Does not fit XLT Model)
1981-2011 Ford Ranger
1991-2015 Ford Explorer

ADDITIONAL INFORMATION
Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle Installation needs to be performed by a trained professional

It’s Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options: Your lugs studs will need to be shortened by grinding them down You can replace your studs will shorter studs if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

Product Features

  • 2x Brand NEW Silver Wheel Adapters Vehicle Bolt Pattern 5×4.5 Wheel Bolt Pattern 5×4.5 Hub Bore 82.5mm Thickness: 1″ Inch (each spacer) Thread Pitch: 1/2″ x 20
  • REQUIRED that youCheck your vehicle compatibility in Product Description BEFORE buying
  • T6 6061 Billet Wheel Adapters 10.9 Grade Steel Threads
  • Mainly used to give your vehicle an agressive stance, and will help with any clearance issues (if present)
  • CNC Machined Usings Aerospace Aluminum

Comments

Comments are disabled for this post.

Searching...